Drought Stress Alters the Concentration of Wood Terpenoids in Scots Pine and Norway Spruce Seedlings

Drought is known to have an impact on the resistance of conifers to various pests, for example, by affecting resin flow in trees. Little is known, however, about the quantitative and qualitative changes in resin when trees are growing in low moisture conditions. We exposed Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) seedlings to medium and severe drought stress for two growing seasons and analyzed the monoterpenes and resin acids in the main stem wood after two years of treatment. In addition to secondary chemistry, we measured the level of nutrients in the needles and the growth response of seedlings. After the first year of treatment, drought stress did not affect the growth of seedlings, but in the second year, shoot growth was retarded, especially in Scots pine. In both conifer species, severe drought increased the concentrations of several individual monoterpenes and resin acids. Total monoterpenes and resin acids were 39 and 32% higher in severe drought-treated Scots pine seedlings than in the controls, and 35 and 45% higher in Norway spruce seedlings. In Scots pine needles, the concentrations of nitrogen and phosphorus increased, while magnesium and calcium decreased compared to controls. In Norway spruce needles, nutrient concentrations were not affected. The results suggest that drought stress substantially affects both the growth of conifers and the chemical quality of the wood. We discuss the potential trade-off in growth and defense of small conifer seedlings.     

Characterization of polyesters prepared from three different phthalic acid isomers by CID-ESI-FT-ICR and PSD-MALDI-TOF mass spectrometry

Polyesters prepared from the same diol, 2-butyl-2-ethyl-1,3-propanediol, but different phthalic acid isomers, phthalic, isophthalic, and terephthalic acid, were characterized by collision-induced dissociation electrospray ionization Fourier transform ion cyclotron resonance (CID-ESI-FT-ICR) and postsource-decay matrix-assisted laser desorption/ionization time-of-flight (PSD-MALDI-TOF) mass spectrometry. Sodiated dihydroxyl-terminated polyester oligomers containing five repeating units at m/z 1634 were selected as precursor ions for dissociation studies. Two main mechanisms occurred in the fragmentation of all of the polyesters, since dissociation of the oligomers was initiated by hydrogen rearrangement or transesterification reactions. Polyesters prepared from different phthalic acid isomers could be distinguished by their fragmentation behavior. Polyester prepared from phthalic acid was easily identified by using both CID-ESI-FT-ICR and PSD-MALDI-TOF mass spectrometry. However, distinguishing between the polyesters prepared from isophthalic and terephthalic acid succeeded marginally only with CID-ESI-FT-ICR mass spectrometry. Molecular dynamics calculations were used to obtain an idea of the fragmentation behavior of the polyesters. The low-energy structures of the precursor ions were determined, and the coordination of the oxygen atoms of the polyester oligomers to the sodium cation was examined more closely. Both the experimental and the theoretical studies showed that the sodium ion affinity of polyester changed with the phthalic acid isomer.     

Visualization of a pharmaceutical unit operation: wet granulation

Recent developments in the field of process engineering and manufacturing sciences enable a new level of process understanding. However, extracting this understanding from increasing amounts of information is challenging. The aim of this study was to create a process vector from a model process describing all relevant information and, by that means, create a tool for combining and visualizing this information. Physical (impeller torque and temperature) and chemical (near-infrared spectroscopy) information from a small-scale high-shear granulation was used in the process vector. The vectors created were visualized by two different methods: principal component analysis (PCA) and the self-organizing map (SOM). None of the individual measurement techniques were able to describe the state of the process alone, although they provided important information about the process. By combining the data and visualizing it, an overview could be achieved. The SOM approach had two advantages over the PCA: it presented the results in terms of the original variables and enabled the analysis of nonlinear responses. However, both visualization methods could be used to describe the progress of the process and to increase the level of process understanding.     

System approach to modeling of liver glucose metabolism with physiologically interpreted model parameters outgoing from [18F]FDG concentrations measured by PET

New mathematical models from physiologically interpreted parameters capable of evaluating glucose metabolism within the liver and/or the whole body were developed. The group of pigs in a fasting state and the group of pigs with euglycemic supraphysiological hyperinsulinemia were scanned by positron emission tomography after a single dose of [(18)F]FDG tracer. Simultaneously frequent sampling of the dynamic data of [(18)F]FDG plasma concentration in artery, portal vein and hepatic vein was obtained. A system approach to the liver and/or the whole-body system by the tools of linear dynamic sysztem theory was used. Three kinds of structural models, single input and single output or multiple outputs and multiple inputs and single output, were identified. Differences between the group of fasting pigs and the group of pigs in euglycemic supraphysiological hyperinsulinemia were identified by estimated parameters of the structural models. The suitability of the structural mathematical models for the estimation of physiologically interpreted parameters from PET was validated.     

Compatibilization of PP/PBT and PP/PA6 blends with a new oxazoline-functionalized polypropylene

Summary Aim of this work was to study the effectiveness of a novel oxazoline-functionalized polypropylene as a compatibilizer for PP/PBT and PP/PA6 blends. This polypropylene-based compatibilizer mixes well with the polypropylene and is capable of reacting with the carboxylic and amine end groups of PBT and PA6. Significant improvements in blend toughness were achieved without reduction in strength and stiffness. These effects were related to stabilized morphology of finely dispersed minor phase well attached to the matrix. The enhanced interfacial interactions between the two phases, in particular at high PBT content were evidenced by increased melt viscosity.     

Effect of Long-Term Forest Fertilization on Scots Pine Xylem Quality and Wood Borer Performance

We tested whether changes in long-term nutrient availability would affect the xylem quality and characteristics of Scots pine trees as a food source for the larvae of the xylophagous wood borer Hylotrupes bajulus L. (Cerambycidae). We looked for an effect of host plant growth and xylem structural traits on H. bajulus larval performance, and looked for delayed effects of long-term forest fertilization on xylem chemical quality. In general, larval performance was dependent on larval developmental stage. However, the growth of larvae also varied with host plant quality (increases in the concentration of nitrogen and carbon-based secondary compounds of xylem were correlated with a decrease in the larval growth rate). The greater annual growth of trees reduced tracheid length and correlated positively with second-instar H. bajulus growth rate. This is consistent with the hypothesis that intrinsic growth patterns of host plants influence the development of the xylophagous wood borer H. bajulus.     

Levels of mycotoxins and sample cytotoxicity of selected organic and conventional grain-based products purchased from Finnish and Italian markets

The contamination levels of 16 different Fusarium- and Aspergillus-mycotoxins were chemically determined from randomly selected organic and conventional grain-based products purchased from Finnish and Italian markets. The cytotoxicity of the samples was analyzed with an in vitro test using feline fetal lung cells. Overall, the concentrations of the mycotoxins studied were low in all of the samples. Enniatins B and B1 as well as deoxynivalenol were the most predominant mycotoxins in the samples, being present in 97%, 97%, and 90% of the samples, respectively. The geographical origin or the agricultural practice had no influence on the mycotoxin concentrations of the samples. The babyfoods included in the samples had significantly lower concentrations of mycotoxins than the other products with a mean total mycotoxin content of 47 microg/kg compared with 99 microg/kg for the other kinds of food. All the samples evoked toxicity in the in vitro test, but no correlation between cytotoxicity and the mycotoxin concentrations was observed.     

Spatial distibution and temporal accumulation of polychlorinated dibenzo-p-dioxins,dibenzofurans, and biphenyls in the Gulf of Finland

Dated sediment cores and surface sediments were analyzed from the Gulf of Finland, a part of the Baltic Sea, to study the sources, levels, distribution, and total amounts of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs). The gulf was found to be severely polluted, with PCDD/F sum concentrations as high as 101000 ng/kg and 479 ng/kg WHO-TEQ in dry weight. The source of pollution was the former manufacturing and use of a chlorophenol based wood preservative along the Kymijoki River. It was estimated thatthe impacted sedimentary area stretched a distance of 75 km away out from the coast and that the PCDD/F sum load attributed to the wood preservative source was 1770 kg of PCDD/Fs or 12.4 (+/-2.8) kg WHO-TEQ. The surface sediments contained 24-66% of the maximum concentrations present in the 1960-1970s, showing that the river still acts as a significant PCDD/F source and may contribute to the high levels in fish. Moreover, the reduced PCDD/F and PCB concentrations were partly due to the dilution by increased dry matter deposition. PCBs were uniformly distributed over the gulf, and the PCB load in the polluted area was 2020 kg or 0.14 kg WHO-TEG.     

Polyphenol and vitamin C contents in European commercial blackcurrant juice products

Vitamin C and polyphenol contents (anthocyanins, proanthocyanidins, phenolic acids and flavonols) were analysed in commercial blackcurrant juice products purchased from various European countries (Finland, Poland, Germany, United Kingdom) using HPLC methods. The aim was to study variation between countries, as well as evaluate the intake of polyphenols from commercial juices. There was significant variation in the contents of polyphenols and vitamin C between countries. Expressed as the ready-to-drink beverages, German, Polish, Finnish and British products averaged anthocyanin contents of 38, 32, 12 and 7.5 mg/2.5 dl, proanthocyanidin contents of 27, 24, 10 and 1.2 mg/2.5 dl, flavonol contents of 16, 15, 5.2 & 1.9 mg/2.5 dl and phenolic acid contents of 12, 8.9, 3.7 and 1.5 mg/2.5 dl, respectively. The mean vitamin C content was highest in British (70 mg/2.5 dl) and lowest in Finnish products (15 mg/2.5 dl). The intake of polyphenols from German and Polish ready-to-drink beverages was clearly higher than that from Finnish, and especially, British beverages.